Ratkaistu

Telia-- Rajaton 5G 300 M-- //have Public IPV6?

  • 12 November 2022
  • 10 kommenttia
  • 226 katselukertaa

Kunniamerkki +2

Telia-- Rajaton 5G 300 M-- //--have Public IPV6 adress

icon

Ratkaisu jäseneltä irritus 12 November 2022, 23:27

Katso alkuperäinen viesti

10 kommenttia

Kunniamerkki +2

no ipv6 public address,
The set of cloudflare cannot access the built network.

Open ipv6 --- Wan port firewall

Käyttäjätaso 5
Kunniamerkki +14

The error message is what you would expect. Telia does not have IPv6.

You have to get IPv6 connectivity using a tunnel or a VPN, or get a subscription from an operator that has IPv6 connectivity.

Saamasi virheilmoitus on mitä voisi odottaakin. Telialla ei ole IPv6:sta.

Joudut hankkimaan IPv6:n käyttämällä tunnelia tai VPN:ää, tai hankkimaan liittymän operaattorilta, jolla on IPv6 yhteydet.

Kunniamerkki +2

The error message is what you would expect. Telia does not have IPv6.

You have to get IPv6 connectivity using a tunnel or a VPN, or get a subscription from an operator that has IPv6 connectivity.

Saamasi virheilmoitus on mitä voisi odottaakin. Telialla ei ole IPv6:sta.

Joudut hankkimaan IPv6:n käyttämällä tunnelia tai VPN:ää, tai hankkimaan liittymän operaattorilta, jolla on IPv6 yhteydet.

thanks, I  buy DNA 5G sim card,  DNA have public IPV6,   /64 --adress
so I have very much IPv6 address。  
bridage  Openwrt, I can get  ipv6 public,  contect  clouflare,。 then i can do everything  use  public IPv6

Kunniamerkki +2

moi.fi  also use DNA internet, SO moi.fi have IPV6, price  cheap

Käyttäjätaso 5
Kunniamerkki +14

bridage  Openwrt

Do you mean that your 4G/5G modem is in bridged mode?

Unfortunately bridging on mobile modems is a cludge. On most of them, IPv6 will not work in bridged mode. Thus, after you have sorted the IPv6 subscription problem, you may have to resort to NAT routing and DMZ instead of bridging. However, if your Openwrt box has integrated 4G/5G, then you should be good to go, like for example having an M.2 4G module in it.

Btw, if you are not using your Rajaton 5G 300 M -subscription for phonecalls, Yhteys mukaan 5G 300 M might be a better alternative. Phonecalls to normal Finnish numbers will be charged 0,09 € per starting minute, messages (both sms and mms) 0,09 €/each. EU data roaming allowance is slightly smaller, 29 GB/month, though.

I think the best overview of Telia mobile services can be found on Telia Yhteys price list. Up to date version can be found on hinnastot page.

 

moi.fi have IPV6

Please note that Moi has only public IPv6. Their IPv4 address will be private!

Altogether, the public ip address availability for mobile data is actually quite complicated.

subscription private
IPv4
public
IPv4
public
IPv6

Telia invoiced subscriptions,
both “voice” / “puhelinliittymät”
and “data” / “mobiililaajakaista”

included¹ 5G: additional service²
2G/3G/4G: included³
not available
Telia Prepaid, Telia Dot included¹ 5G: not available
2G/3G/4G: included³
not available
Dna “voice” / “puhelinliittymät” subscriptions,
Super Prepaid, Rajaton Prepaid
included not available included
Dna “data” / “mobiililaajakaista” subscriptions,
Dataprepaid
included included included

Elisa / Saunalahti “voice” / “puhelinliittymät”
subscriptions, Latausliittymä, Prepaid

included not available included
Elisa / Saunalahti “data” / “mobiililaajakaista”
subscriptions
included available on request included
Moi included not available included

 

¹ use APN internet
² requires an additional subscription, use APN opengate
³ use APN prointernet

 

Käyttäjätaso 5
Kunniamerkki +14

If you want to try IPv6 tunneling before changing your subscription, here’s a couple:

Please note that some tunneling protocols require that you have a public IPv4 address. In such case use APN prointernet on 2G/3G/4G network, or if you are already subscribing to Yhteyspiste additional service, use APN opengate on any network technology.

For anyone currently using Kuusitunneli service, please note that they are no longer accepting new users and the service will be shut down on 31st December 2022.

Kunniamerkki +2

bridage  Openwrt

Do you mean that your 4G/5G modem is in bridged mode?

Unfortunately bridging on mobile modems is a cludge. On most of them, IPv6 will not work in bridged mode. Thus, after you have sorted the IPv6 subscription problem, you may have to resort to NAT routing and DMZ instead of bridging. However, if your Openwrt box has integrated 4G/5G, then you should be good to go, like for example having an M.2 4G module in it.

Btw, if you are not using your Rajaton 5G 300 M -subscription for phonecalls, Yhteys mukaan 5G 300 M might be a better alternative. Phonecalls to normal Finnish numbers will be charged 0,09 € per starting minute, messages (both sms and mms) 0,09 €/each. EU data roaming allowance is slightly smaller, 29 GB/month, though.

I think the best overview of Telia mobile services can be found on Telia Yhteys price list. Up to date version can be found on hinnastot page.

 

moi.fi have IPV6

Please note that Moi has only public IPv6. Their IPv4 address will be private!

Altogether, the public ip address availability for mobile data is actually quite complicated.

subscription private
IPv4
public
IPv4
public
IPv6

Telia invoiced subscriptions,
both “voice” / “puhelinliittymät”
and “data” / “mobiililaajakaista”

included¹ 5G: additional service²
2G/3G/4G: included³
not available
Telia Prepaid, Telia Dot included¹ 5G: not available
2G/3G/4G: included³
not available
Dna “voice” / “puhelinliittymät” subscriptions,
Super Prepaid, Rajaton Prepaid
included not available included
Dna “data” / “mobiililaajakaista” subscriptions,
Dataprepaid
included included included

Elisa / Saunalahti “voice” / “puhelinliittymät”
subscriptions, Latausliittymä, Prepaid

included not available included
Elisa / Saunalahti “data” / “mobiililaajakaista”
subscriptions
included available on request included
Moi included not available included

 

¹ use APN internet
² requires an additional subscription, use APN opengate
³ use APN prointernet

 

 

 

Openwrt's IPV6 relay (also called ipv6 transparent transmission) enables the back-end device to obtain the native ipv6 public network address

Kunniamerkki +2

If you want to try IPv6 tunneling before changing your subscription, here’s a couple:

Please note that some tunneling protocols require that you have a public IPv4 address. In such case use APN prointernet on 2G/3G/4G network, or if you are already subscribing to Yhteyspiste additional service, use APN opengate on any network technology.

For anyone currently using Kuusitunneli service, please note that they are no longer accepting new users and the service will be shut down on 31st December 2022.

 

ssh OR Winscp 

opwnert     /etc/config/dhcp

-------

wan
option master '1'

wan6
option master '1'

---------openwrt----------/etc/config/dhcp-------------------------------

config dhcp 'wan'
        option interface 'wan'
        option ignore '1'
        option ra 'relay'
        option dhcpv6 'relay'
        option ndp 'relay'
        option master '1'

 

config dhcp 'wan6'
        option interface 'wan6'
        option ignore '1'
        option ra 'relay'
        option dhcpv6 'relay'
        option ndp 'relay'
        option master '1'

 

 

Kunniamerkki +2

delete
Global Network Options
IPv6 ULA prefix

Firewall Allow WAN

You can get ipv6 by restarting openwrt, and you can also ping the ipv6 address

Kunniamerkki +2

bridge openwrt ipv6 setup, easy

Vastaa