Skip to main content

24M/1M Hidastunut

  • December 11, 2014
  • 13 kommenttia
  • 3 katselukertaa

Modeemina TW-EA501 v3. Kokeiltu Zyxel 660HW ja Zyxel 600-T1.

----------------------------------------------------------------------------
ADSL linjan tyyppi Annex A
Modulointi Autom
Laitteen ohjelmistoversio DMT FwVer: 3.5.18.0_A_TC, HwVer:T14F7_1.0
Linjan tila (DMT) Up
Toimintatila ADSL G.Dmt
Lähetysnopeus 832 kbps
Vastaanottonopeus 1984 kbps
SNR Marginali (Lähetys) 7.0 db
SNR Marginali (Vastaanotto) 6.5 db
Linjan vaimennus (Lähetys) 24.0 db
Linjan vaimennus (Vastaanotto) 24.5 db
----------------------------------------------------------------------------

Jos pakotan moduloinnin ADSL+2 niin modeemi ei yhdistä ollenkaan, vastaanottonopeudesta näkyy aika hyvin kuinka paljon on linja hidastunut. Olen lukenut tuhat kertaa Teidän ohjesivut enkä ole saanut ongelmaa ratkaistua.

Uskon että ongelma löytyy jostain muualta kuin minun modeemista/tietokoneesta.

13 kommenttia

  • January 9, 2012
Hei, ainakin tähän vaivaan auttanut minulla sellainen viritys, että menen modeemin hallintaan, ja sieltä DNS palvelimiksi laitan Googlen DNS eli 8.8.8.8 ja 8.8.4.4 Sen jälkeen yleensä pelittää minulla hyvin ja nousee nopeudet.

  • January 9, 2012
Buffale kirjoitti:
Hei, ainakin tähän vaivaan auttanut minulla sellainen viritys, että menen modeemin hallintaan, ja sieltä DNS palvelimiksi laitan Googlen DNS eli 8.8.8.8 ja 8.8.4.4 Sen jälkeen yleensä pelittää minulla hyvin ja nousee nopeudet.

Ei auttanut paljoa...

-----------------------------------------------
ADSL linjan tyyppi Annex A
Modulointi Autom.
Laitteen ohjelmistoversio DMT FwVer: 3.5.18.0_A_TC, HwVer:T14F7_1.0
Linjan tila (DMT) Up
Toimintatila ADSL G.Dmt
Lähetysnopeus 832 kbps
Vastaanottonopeus 2304 kbps
SNR Marginali (Lähetys) 7.0 db
SNR Marginali (Vastaanotto) 6.5 db
Linjan vaimennus (Lähetys) 17.0 db
Linjan vaimennus (Vastaanotto) 25.0 db
-----------------------------------------------

ADSL2+ ei mene vieläkään päälle... :(

  • January 9, 2012
ADSL+ tekniikka pitää olla käytössä jotta päästään 24M nopeuksiin. Tuossa sulla on vähän päälle mega, down siis.

Oletko modeemin asetukset ihan varmasti määritellyt oikein, kuten tuolla Soneran ohjeissa lukee? Kannattaa kokeilla ehkä tuota resetointia, tai siis tehdasasetuksien palauttamista ja sitten taas vetää alusta. Tuo auttaa ainakin minulla aina välillä myös.

  • January 10, 2012
Buffale kirjoitti:
ADSL+ tekniikka pitää olla käytössä jotta päästään 24M nopeuksiin. Tuossa sulla on vähän päälle mega, down siis.

Oletko modeemin asetukset ihan varmasti määritellyt oikein, kuten tuolla Soneran ohjeissa lukee? Kannattaa kokeilla ehkä tuota resetointia, tai siis tehdasasetuksien palauttamista ja sitten taas vetää alusta. Tuo auttaa ainakin minulla aina välillä myös.

Kolmella eri modemilla kokeiltu, ei voi enään johtua meikäläisen vehkeistä :D

  • January 10, 2012
Hei mosa!
Mikäli ongelma esiintyy useammalla eri laitteella, suosittelen sinua tekemään vikailmoituksen Tekniseen Asiakaspalveluumme, jotta asia voidaan tutkia tarkemmin. Käythän ennen sitä myös täältä löytyvät ohjeet läpi.

  • January 12, 2012
Vielä yksi pieni homma, taloyhtiöön asennettiin syksyllä Finnetin ADSL koko taloon, voiko olla, että piuhat on menneet sekasin? IP-osoite kyllä näyttää, että olen Soneran verkkossa.

  • January 15, 2012
mosa kirjoitti:
Vielä yksi pieni homma, taloyhtiöön asennettiin syksyllä Finnetin ADSL koko taloon, voiko olla, että piuhat on menneet sekasin? IP-osoite kyllä näyttää, että olen Soneran verkkossa.




Olisiko käynyt niin että huoneistoosi on kytketty alkuperäinen Sonera adsl ja taloyhtiön Finnet adsl(sisäverkko kytketty myös Finnetin dslamiin talojakamossa) rinnan päälle jolloin se saattaisi häiritä?

  • December 10, 2012
Moi! Nyt on Soneran-setä käynyt taloyhtiön alakerrassa ja todennut että vika on mitä ilmeisemmin minun sisäverkossani...

Nykyinen ADSL-reititin Telewellin EA510 ADSL & 3G/4G+WLAN, eikä ADSL2+ mene vieläkään päälle.

DSP ohjelmistoversio DMT FwVer: 3.10.1e.0_A, HwVer:TeF7_7.0
Linjan tila Päällä
Toiminnallinen tila ADSL G.DMT
Lähetysnopeus 800 kbps
Vastaanottonopeus 1984 kbps
SNR (Lähetysnopeus) 9.0 db
SNR (Vastaanottonopeus) 2.5 db
Vaimennus (Lähetysnopeus) 24.0 db
Vaimennus (Vastaanottonopeus) 27.5 db


Olen yrittänyt laittaa valinnoista ADSL2+:n päälle PAKOSTA mutta silloin yhteys ei ole pelannut ollenkaan. Ainoastaan AUTO-toiminnolla yhteys menee ADSL G.DMT

  • December 10, 2012
Dec 10 18:07:22 kernel: Dyingasp ON!^M
Dec 10 18:07:22 kernel: Valid Loss of power ON!^M
Dec 10 18:07:23 kernel: Linesync lost
Dec 10 18:07:24 kernel: ANNEXAIJLM^M
Dec 10 18:07:24 kernel: Open Loop Detect Enable ^M
Dec 10 18:07:24 kernel: option = 0^M
Dec 10 18:07:24 kernel: largeD flag=2 (0:maxD=64, 1:maxD=128, 2:maxD=511)^M
Dec 10 18:07:24 kernel: use snr report method 2^M
Dec 10 18:07:24 kernel: set try multimode number to 4 (dropmode try num 3)^M
Dec 10 18:07:24 kernel: Testlab 2c ^M
Dec 10 18:07:33 kernel: Detect DSL status:0x08 into polling mode!!^M
Dec 10 18:07:35 DHCP client: Broadcast a release
Dec 10 18:07:35 DHCP client: Sending release...
Dec 10 18:07:37 DHCP client: stop 6To4 ...
Dec 10 18:07:37 DHCP client: Entering released state
Dec 10 18:07:38 kernel: Detect DSL status:0x00 into INT mode!!^M
Dec 10 18:07:38 kernel: Linesync lost
Dec 10 18:07:38 igmp[775]: igmp stop!
Dec 10 18:07:44 kernel: Detect DSL status:0x08 into polling mode!!^M
Dec 10 18:07:58 kernel: Linesync lost
Dec 10 18:07:58 kernel: Detect DSL status:0x00 into INT mode!!^M
Dec 10 18:08:05 kernel: Detect DSL status:0x08 into polling mode!!^M
Dec 10 18:08:09 kernel: Detect DSL status:0x00 into INT mode!!^M
Dec 10 18:08:10 kernel: Linesync lost
Dec 10 18:08:14 kernel: Detect DSL status:0x08 into polling mode!!^M
Dec 10 18:08:22 syslog: Failover to 3G
Dec 10 18:08:27 kernel: Detect DSL status:0x00 into INT mode!!^M
Dec 10 18:08:27 kernel: Linesync lost
Dec 10 18:08:32 syslog: no vendor code yet
Dec 10 18:08:32 syslog: exit!
Dec 10 18:08:32 syslog: something wrong on 3G
Dec 10 18:08:34 kernel: Detect DSL status:0x08 into polling mode!!^M
Dec 10 18:08:39 kernel: Detect DSL status:0x00 into INT mode!!^M
Dec 10 18:08:39 kernel: Linesync lost
Dec 10 18:08:46 kernel: Detect DSL status:0x08 into polling mode!!^M
Dec 10 18:08:59 kernel: Detect DSL status:0x00 into INT mode!!^M
Dec 10 18:08:59 kernel: Linesync lost
Dec 10 18:09:04 DHCP SERVER: DHCPINFORM from 192.168.0.100
Dec 10 18:09:06 kernel: Detect DSL status:0x08 into polling mode!!^M
Dec 10 18:09:07 DHCP SERVER: DHCPINFORM from 192.168.0.100
Dec 10 18:09:11 kernel: Detect DSL status:0x00 into INT mode!!^M
Dec 10 18:09:11 kernel: Linesync lost
Dec 10 18:09:17 kernel: Detect DSL status:0x08 into polling mode!!^M
Dec 10 18:09:31 kernel: Detect DSL status:0x00 into INT mode!!^M
Dec 10 18:09:31 kernel: Linesync lost
Dec 10 18:09:38 kernel: Detect DSL status:0x08 into polling mode!!^M
Dec 10 18:09:43 kernel: Detect DSL status:0x00 into INT mode!!^M
Dec 10 18:09:43 kernel: Linesync lost
Dec 10 18:09:47 kernel: Detect DSL status:0x08 into polling mode!!^M
Dec 10 18:10:01 kernel: Detect DSL status:0x00 into INT mode!!^M
Dec 10 18:10:01 kernel: Linesync lost
Dec 10 18:10:07 kernel: Detect DSL status:0x08 into polling mode!!^M
Dec 10 18:10:12 kernel: Detect DSL status:0x00 into INT mode!!^M
Dec 10 18:10:13 kernel: Linesync lost
Dec 10 18:10:17 kernel: Detect DSL status:0x08 into polling mode!!^M
Dec 10 18:10:30 kernel: Detect DSL status:0x00 into INT mode!!^M
Dec 10 18:10:30 kernel: Linesync lost
Dec 10 18:10:37 kernel: Detect DSL status:0x08 into polling mode!!^M
Dec 10 18:10:42 kernel: Detect DSL status:0x00 into INT mode!!^M
Dec 10 18:10:42 kernel: Linesync lost
Dec 10 18:10:47 kernel: Detect DSL status:0x08 into polling mode!!^M
Dec 10 18:11:07 kernel: Detect DSL status:0x20 into INT mode!!^M
Dec 10 18:11:07 kernel: Linesync achieved
Dec 10 18:11:07 kernel: near-end interleaved channel bit rate: 1984 kbps
Dec 10 18:11:07 kernel: near-end fast channel bit rate: 0 kbps
Dec 10 18:11:07 kernel: far-end interleaved channel bit rate: 768 kbps
Dec 10 18:11:07 kernel: far-end fast channel bit rate: 0 kbps
Dec 10 18:11:14 DHCP client: Performing a DHCP renew
Dec 10 18:11:14 DHCP client: Sending discover...
Dec 10 18:11:14 kernel: vc=0: change the peak rate
Dec 10 18:11:15 DHCP client: Sending select for 84.249.**.***...
Dec 10 18:11:15 DHCP client: Lease of 84.249.**.*** obtained, lease time 43200
Dec 10 18:11:15 DHCP client: before call UpdateWANIP, unit=0, ip=84.249.**.***
Dec 10 18:11:20 dnsmasq[428]: using nameserver 193.210.19.***#53
Dec 10 18:11:20 dnsmasq[428]: using nameserver 192.89.123.***#53
Dec 10 18:11:20 igmp[863]: igmp started!
Dec 10 18:11:20 syslog: Failback ..


Tälläisen litanian reititin puskee lokiin kun laitan yhteyden Annex A / Operaattorin ADSL-asetusten mukaan ja moduloinin kohtaan AUTO

  • December 10, 2012
Ja tässä vielä linjatestin tulos:

Dec 10 18:23:36 syslog:  FwVer:3.10.1e.0_A_TC3086 HwVer:Te.F7_7.0 
Dec 10 18:23:36 syslog: ADSL link status: up
Dec 10 18:23:36 syslog:
Dec 10 18:23:36 syslog: Opmode: ITU G.992.1(G.DMT)
Dec 10 18:23:36 syslog:
Dec 10 18:23:36 syslog: near-end interleaved channel bit rate: 1984 kbps
Dec 10 18:23:36 syslog: near-end fast channel bit rate: 0 kbps
Dec 10 18:23:36 syslog: far-end interleaved channel bit rate: 768 kbps
Dec 10 18:23:36 syslog: far-end fast channel bit rate: 0 kbps
Dec 10 18:23:36 syslog:
Dec 10 18:23:36 syslog: near-end FEC error fast: 0
Dec 10 18:23:36 syslog: near-end FEC error interleaved: 0
Dec 10 18:23:36 syslog: near-end CRC error fast: 0
Dec 10 18:23:36 syslog: near-end CRC error interleaved: 17
Dec 10 18:23:36 syslog: near-end HEC error fast: 0
Dec 10 18:23:36 syslog: near-end HEC error interleaved: 2
Dec 10 18:23:36 syslog: far-end FEC error fast: 0
Dec 10 18:23:36 syslog: far-end FEC error interleaved: 0
Dec 10 18:23:36 syslog: far-end CRC error fast: 0
Dec 10 18:23:36 syslog: far-end CRC error interleaved: 0
Dec 10 18:23:36 syslog: far-end HEC error fast: 0
Dec 10 18:23:36 syslog: far-end HEC error interleaved: 0
Dec 10 18:23:36 syslog: ADSL uptime :12 min, 29 secs
Dec 10 18:23:36 syslog: ADSL activetime :0 min, 12 secs
Dec 10 18:23:36 syslog:
Dec 10 18:23:36 syslog: Downstream:
Dec 10 18:23:36 syslog: relative capacity occupation: 254%
Dec 10 18:23:36 syslog: noise margin downstream: 2.0 db
Dec 10 18:23:36 syslog: output power upstream: 12.0 dbm
Dec 10 18:23:36 syslog: attenuation downstream: 27.5 db
Dec 10 18:23:36 syslog:
Dec 10 18:23:36 syslog: Upstream:
Dec 10 18:23:36 syslog: relative capacity occupation: 92%
Dec 10 18:23:36 syslog: noise margin upstream: 8.0 db
Dec 10 18:23:36 syslog: output power downstream: 19.0 dbm
Dec 10 18:23:36 syslog: attenuation upstream: 23.5 db
Dec 10 18:23:36 syslog:
Dec 10 18:23:36 syslog: Bit table:
Dec 10 18:23:36 syslog: carrier load: number of bits per tone
Dec 10 18:23:36 syslog: tone 0- 31: 00 00 00 06 89 98 88 89 9a 97 9a 9a aa 99 99 87
Dec 10 18:23:36 syslog: tone 32- 63: 02 32 32 33 33 43 44 45 55 45 55 55 79 99 a2 a7
Dec 10 18:23:36 syslog: tone 64- 95: 06 66 66 65 65 55 55 56 55 55 55 44 44 44 44 44
Dec 10 18:23:36 syslog: tone 96-127: 44 44 33 44 44 44 44 34 44 44 44 43 33 33 33 22
Dec 10 18:23:36 syslog: tone 128-159: 22 22 22 22 22 22 00 00 00 00 00 00 00 20 02 22
Dec 10 18:23:36 syslog: tone 160-191: 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22
Dec 10 18:23:36 syslog: tone 192-223: 22 23 32 33 33 33 33 33 33 33 33 22 22 22 22 22
Dec 10 18:23:36 syslog: tone 224-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Dec 10 18:23:36 syslog:
Dec 10 18:23:36 syslog: near end itu identification: 26005443544e0000
Dec 10 18:23:36 syslog: far end itu identification: b5004244434da325
Dec 10 18:23:36 syslog: attain upstream: 936
Dec 10 18:23:36 syslog: attain downstream: 928
Dec 10 18:23:36 syslog:
Dec 10 18:23:36 syslog: ADSL activetime second: 12
Dec 10 18:23:36 syslog: ADSL total ativetime second: 24

  • December 10, 2012
Hei Mosa,

Lisäisitkö asiakasnumerosi tietoihisi niin voin tarkistaa tilannetta hieman paremmin. Lisääminen onnistuu valitsemalla Omat asetukset >> profiili >> asiakasnumero.

  • December 10, 2012
Marko- kirjoitti:
Hei Mosa,

Lisäisitkö asiakasnumerosi tietoihisi niin voin tarkistaa tilannetta hieman paremmin. Lisääminen onnistuu valitsemalla Omat asetukset >> profiili >> asiakasnumero.

Lisätty.

  • December 11, 2012
Hei Mosa,

Tarkistin vikailmoituksen tiedot ja asentaja on käynyt mittaamassa yhteyden taloyhtiön jakamosta. Yhteyden nopeus on sinne asti normaali. Vika jäisi siis taloyhtiön sisäverkkoon.

Jos siis modeemin puhelinkaapeli ja modeemi ovat kunnossa, niin ongelma on puhelinpistokkeen ja talojakamon välillä. Taloyhtiön sisäverkosta vastaa taloyhtiö itse, joten ongelmaan liittyen kannattaa olla yhteydessä isännöitsijään tai huoltomieheen.