Telia Yhteisö
peruuta
Näytä tulokset kohteelle 
Hae sen sijaan kohdetta 
Tarkoititko: 
jakas
Uusi keskustelija
  • 1 custom-general.kudos
  • 6 custom-general.replies
  • 0 custom-general.solutions

Some help in English !!

Some help in English !!
 

I have a 4g new mokkula 

HUAWEI E5573 and I am trying to connect that to my Telewell EAV510 V6.

I have open gate ordered but I just can seem to open the ports I have added the profile as Suggested Opengate and opengate in both the Huawei and telewell. I dont know what I am doing wrong. I am opening port 12000 on an ip 198.168.0.171. I have forwarded the port but its not open. If I use just the telewell via an ADSL line its all ok the ports are open both ways but thru they Huawei the port is closed. If anyone have any experience please add to this thread

2 vastausta
irritus
Konkari
  • 512 custom-general.kudos
  • 870 custom-general.replies
  • 79 custom-general.solutions

Both Huawei E5573 and Telewell EAV510 are routers.

 

If you chain two NAT routers together, you must define port forwarding to both of them. Thus, first define port forwarding on E5573 user interface forwarding port 12000 to the ip address which EAV510 got from E5573. Then define another port forward on EAV510 for port 12000 to the actual device you have in your network, like 198.168.0.171.

 

This can get quite complicated, so it would be better to check if either E5573 or EAV510 would allow bridging the mobile connection. In that case you would need only one port forwarding on the device, which performs the NAT routing.

 

The correct APN opengate has to be set up on the E5573, obviously.

 

If the setup you currently have is too complicated to manage, I would recommend either replacing the E5573 by a simple LTE USB stick that does not route or replace both devices by a single LTE router with Ethernet ports on it, like for example Teltonika RUT950, Huawei B315 or Huawei B525

jakas
Uusi keskustelija
  • 1 custom-general.kudos
  • 6 custom-general.replies
  • 0 custom-general.solutions

ok thankyou. I shall get back if the problem is not solved